This information was prepared by ICOM America. Inc.
IC-PW1 - HF / 6 Meter All Band 1 kW Linear Amplifier (ÁõÆø±â)
IC-PW1 control headŹ»ó¿ëÀ¸·Î¼­ ºÐ¸®µµ µÇ¸ç, ¸®¸ðÆ® ÄÁÆ®·Ñµµ °¡´ÉÇÑ ÇüÅÂÀÓ. »çÁøÀ» Ŭ¸¯ÇϽøé Å©°Ô º¼ ¼ö ÀÖ½À´Ï´Ù.

View IC-PW1 mechanical drawing dimensions.

IC-PW1 specifications:

  • Dimensions: 13.8 (W), 10.6 (H), 15.0 (D), 55 lb, 2 oz
  • Auto band changing
  • Four antenna connectors
  • Built in auto antenna tuner
  • Capable of matching 3:1 SWR on HF, and 2:5:1 on 6 meters
  • IC-PW1 complete systemMatches a wide array of antennas
  • 3 cooling fans
  • 100% duty cycle (even during RTTY or SSTV)
  • Full break-in operation
  • Auto AC input voltage selector
  • Dual CPUs for system operation, monitoring and control
  • CPU memories for automatic antenna selection and switching for fast band/antenna changes. Works with almost any make of HF, 6 Meter, or HF / 6M transceiver... not just ICOM rigs. Check with your dealer.

IC-PW1 Internal ViewIMD PA unit: IC-PW1

 

IC-PW1 Specifications
This information is taken directly off of the ICOM IC-PW1 brochure.
General
  • Frequency Coverage (MHz):
    • 1.800 - 1.999
    • 3.500 - 3.999
    • 7.000 - 7.300
    • 10.100 - 10.150
    • 14.000 - 14.350 (revised 5/27/99)
    • 1.8068 - 18.168
    • 21.000 - 21.450 (revised 5/27/99)
    • 24.890 - 24.990 (revised 5/27/99)
    • 28.000 - 28.700* (revised 5/27/99)
    • 50.000 - 54.000* (revised 5/27/99)
    • *The antenna tuner can only be used on the 24 - 28 MHz bands
  • Current Drain:
    • Less than 15 A (max. output at 200 V)
    • Less than 20 A (max. output at 100 V)
  • Usable temperature range: -10°C to +60°C; +14°F to +140°F.
  • Power supply requirements: 180 - 264 V AC or 90 - 132 V AC (single phase; 50 / 60 Hz)
  • Duty cycle: Full duty
  • Input connector: SO-239 x 2 (50 ohm)
  • Output connector: SO-239 x 4 (50 ohm)
Linear Amplifier
  • Output power:
    • AC Input 180 - 264 V AC 90 - 132 V AC
    • CW, RTTY 1 kW 500 W
    • SSB 1 kW PEP 500 W PEP
  • Driving power: Max. 100 W
  • Spurious emissions: Less than -60 dB (HF bands)
Antenna Tuner
  • Output matching range (tuner switch ON):
    • 16.7 to 150 (HF bands)
    • 20.0 to 125 (50 MHz)
  • Auto tuning accuracy: VSWR 1.5:1 or less
  • Min. required input power: 60 W
  • Insertion loss: Less than 1 dB (after tuning)
Supplied Accessories
  • Controller separation cable
  • ACC cables
  • Coaxial cable with PL-259 plugs