| IC-R2 -
Handheld Receiver |
Ultra compact, super wide band. 사진을 클릭하시면
크게 볼 수 있습니다.
작은 주머니에 들어 가면서도 우수한
오디오 품질.
Specifications:
- Ultra Compact size: 2.3 (W), 3.4 (H), 1.1 (D), 6
oz. (about 1/2 the size of most other handheld receivers)
- Wide-band performance: 500 KHz - 1.3 GHz *
- AM/FM/WFM
- Large front panel controls for easy operation
(like quickly switching bands)
- Surprisingly loud and crisp audio from a unit this
size
- 100 mW audio output
- Large 36mm (diagonally measured) speaker
- Triple conversion superheterodyne
- Large, backlit LCD display
- Timer included
- Battery charge indicator
- Easy to see, wide viewing angle
- 400 memory channels
- 8 banks of 50 channels
- EEPROM to protect against memory loss
- Memory info includes tuning step and other
settings
- Tone search (CTCSS search)
- Tone squelch (CTCSS decode), auto set with manual
set override
- Pocket beep
- Built-in attenuator
- Wide selction of tuning steps
- Multiple scan functions
- Includes
2 AA size Ni-Cd batteries and charger, or use AA size alkaline batteries -- your
choice
- Noise blanker
- Priority watch
- Lock setting
- Sleep timer
- Auto power off with selectable times
- Earphone jack
- SMA antenna
- Weather resistant construction
- PC programmable:
- Clone from PC to IC-R2, or IC-R2 to IC-R2
- Use available 3rd party FCC Master File licensee
database software and your PC to quickly customize your IC-R2 to scan only the
active channels you want--anywhere in the country!
- Software and connection cable are optional
equipment
|
| R2 Specifications |
| This information is taken directly
off of the ICOM IC-R2 brochure.
|
| General |
- Frequency Range (USA):
- 0.495-823.995 MHz
- 849.0-868.995 MHz
- 894.0-1300.995 MHz
- Frequency Range (Canada, most other
countries):
- Mode: FM, WFM AM
- Tuning Steps: 5, 6.25, 9, 10, 12.5, 15, 20, 25,
30, 50, 100 kHz
- Number of Memory Channels: 450 (400 regular, 50
scan edges)
- Usable Temperature Range: -10°C to +50°C; +14°F to
+122°F
- Current Drain (at 3.0 V DC):
- Rated Audio: 170 mA typ.
- Standby: 100 mA typ.
- Power Saved: 41 mA typ.
- Power Supply Requirement: 2 x AA (R6) Ni-Cd or
alkaline cells
- Antenna Connector: SMA (50 ohms)
- Dimensions: 58(W) x 86(H) x 27(D) mm, 2.3(W) x
3.4(H) x 1.1(D) in (projections not included)
- Weight: 170 kg; 6 oz.
|
| Receiver |
- Receive System: Triple conversion
superheterodyne
- Intermediate Freq.
- 1st: 266.7 MHz
- 2nd: 19.65 MHz
- 3rd: 450 kHz
- Sensitivity (except spurious points;
typical):
- FM (at 12 dB SINAD)
- 1.625 - 5.0 MHz, 0.4 µV
- 5.005 - 29.995 MHz, 0.25 µV
- 30 - 117.995 MHz, 0.2 µV
- 118 - 174.995 MHz, 0.18 µV
- 175 - 329.995 MHz, 0.22 µV
- 330 - 429.995 MHz, 0.25 µV
- 430 - 450 MHz, 0.22 µV
- 450.005 - 469.995 MHz, 0.25 µV
- 470 - 999.995 MHz, 0.28 µV
- 1000+ MHz, 0.45 µV
- WFM (at 12 dB SINAD):
- 76 - 108 MHz, 0.71 µV
- 175 - 221.995 MHz, 0.71 µV
- 470 - 770 MHz, 1.0 µV
- AM (at 12 dB SINAD):
- 0.495 - 5 MHz, 1.3 µV
- 5.005 - 30 MHz, 0.79 µV
- 118 - 136 MHz, 0.63 µV
- 222 - 246.995 MHz, 0.63 µV
- 247 - 329.995 MHz, 0.71 µV
- Selectivity
- AM, FM: More than 15 kHz/6 dB, Less than 30 kHz/60
dB
- WFM: More than 150 kHz/8 dB
- Audio Output Power: 100 mW typical, at 10%
distortion with an 8 ohm load.
- External Speaker Connector: 3-conductor 3.5(d) mm
(1/8")/8 ohms
|
| Supplied Accessories |
- Two rechargeable AA Ni-Cd cells and charger
- Antenna
- Hand strap
- Belt Clip
|
| Options |
- CS-R2 CLONING SOFTWARE + OPC-478 CLONING CABLE:
Provides quick and easy programming of memory channels, memory names and set
mode contents via an IBM® compatible PC.
- OPC-474 CLONING CABLE: Allows you to transfer data
between receivers.
- LC-146 CARRYING CASE
- HP-4 HEADPHONE/SP-13 EARPHONE: Provide clear audio
in noisy environments
- AD-925MA ANTENNA CONNECTOR ADAPTER: Allows you to
connect a BNC type antenna
- BC-127A/D Ni-Cd CHARGER: Same as supplied. Up to 4
Ni-Cd cells can be charged simultaneously
|
IC-R3 IC-R10
IC-R75 PCR-100
PCR-1000 IC-R8500
IC-R9000 |
